Feature Ptp - Cisco Nexus 7000 Series Reference Manual

F Commands

feature ptp

To enable the Precision Time Protocol (PTP) feature on the current virtual device context (VDC), use
the feature ptp command. To disable the PTP feature, use the no form of this command.
Syntax Description This command has no arguments or keywords.
Defaults
Disabled
Command Modes
Global configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to enable the PTP feature on the current VDC:
switch# configure terminal
switch(config)# feature ptp
switch(config)#
This example shows how to disable the PTP feature on the current VDC:
switch(config)# no feature ptp
2011 Jul
nt system-fm-ptp's creation in progress...
2011 Jul
created successfully
switch(config)#
Related Commands Command
ptp source
ptp domain
ptp priority1
OL-25806-03
feature ptp
no feature ptp
Modification
This command was introduced.
5 06:11:07 switch %FEATURE-MGR-2-FM_AUTOCKPT_IN_PROGRESS: AutoCheckpoi
5 06:11:07 switch %FEATURE-MGR-2-FM_AUTOCKPT_SUCCEEDED: AutoCheckpoint
Description
Configures the source IP address for all PTP packets.
Configures the domain number to use for this clock.
Configures the priority1 value to use when advertising this clock.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
feature ptp
179