Show Redundancy - Cisco Catalyst 3650 series Command Reference Manual

show redundancy

To display redundancy facility information, use the show redundancy command in privileged EXEC mode
show redundancy [clients| config-sync| counters| history [reload| reverse]| slaves[slave-name] {clients|
counters}| states| switchover history [domain default]]
Syntax Description
clients
config-sync
counters
history
history reload
history reverse
slaves
slave-name
clients
counters
states
switchover history
domain default
Command Default
None
Command Modes
Privileged EXEC (#)
(Optional) Displays information about the redundancy facility client.
(Optional) Displays a configuration synchronization failure or the ignored
mismatched command list (MCL). For more information, see
config-sync, on page 869.
(Optional) Displays information about the redundancy facility counter.
(Optional) Displays a log of past status and related information for the
redundancy facility.
(Optional) Displays a log of past reload information for the redundancy facility.
(Optional) Displays a reverse log of past status and related information for the
redundancy facility.
(Optional) Displays all slaves in the redundancy facility.
(Optional) The name of the redundancy facility slave to display specific
information for. Enter additional keywords to display all clients or counters
in the specified slave.
Displays all redundancy facility clients in the specified slave.
Displays all counters in the specified slave.
(Optional) Displays information about the redundancy facility state, such as
disabled, initialization, standby or active.
(Optional) Displays information about the redundancy facility switchover
history.
(Optional) Displays the default domain as the domain to display switchover
history for.
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
show redundancy
show redundancy
865