Ntp Enable - Cisco Nexus 7000 Series Reference Manual

ntp enable

ntp enable
To enable Network Time Protocol (NTP), use the ntp enable command. To disable NTP, use the no
command form.
Syntax Description This command has no arguments or keywords.
Defaults
Enabled
Command Modes
Global configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
4.0(3)
Usage Guidelines
NTP must be configured in the default VDC. It cannot be configured in any other VDC.
This command does not require a license.
Examples
This example shows how to disable NTP:
switch# no ntp enable
Related Commands Command
ntp server
Cisco Nexus 7000 Series NX-OS System Management Command Reference
298
ntp enable
no ntp enable
Modification
This command was deprecated.
This command was introduced.
Description
Configures a remote NTP server.
N Commands
OL-25806-03