Lldp Transmit - Cisco Nexus 7000 Series Reference Manual

lldp transmit

lldp transmit
To enable the transmission of Link Layer Discovery Protocol (LLDP) packets on an interface, use the
lldp transmit command. To disable the transmission of LLDP packets, use the no form of this command.
Syntax Description This command has no arguments or keywords.
Defaults
Enabled
Command Modes
Interface configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.0(1)
Usage Guidelines Make sure that you are in the correct virtual device context (VDC). To switch VDCs, use the switchto
vdc command.
Make sure that you have globally enabled the LLDP on the device.
This command does not require a license.
Examples This example shows how to enable the transmission of LLDP packets on an interface:
switch(config)# interface ethernet 7/1
switch(config-if)# lldp transmit
switch(config-if)# exit
switch(config)#
This example shows how to disable the transmission of LLDP packets on an interface:
switch(config)# interface ethernet 7/1
switch(config-if)# no lldp transmit
switch(config-if)# exit
switch(config)#
Cisco Nexus 7000 Series NX-OS System Management Command Reference
238
lldp transmit
no lldp transmit
Modification
This command was introduced.
L Commands
OL-25806-03