Cisco Nexus 7000 Series Reference Manual page 46

alert-group
alert-group
To configure a Call home CLI command for an alert group, use the alert-group command. To remove
the command from the alert group, use the no form of this command.
Syntax Description
All
Configuration
Diagnostic
EEM
Environmental Specifies events related to power,fan,temperature related events.
Inventory
License
Linecard-
Hardware
Supervisor-
Hardware
Syslog-group-
port
System
Test
user-def-cmd
cli_command
Defaults None
Command Modes
Call home configuration
Supported User Roles
network-admin
vdc-admin
Cisco Nexus 7000 Series NX-OS System Management Command Reference
18
alert-group {All | Configuration | Diagnostic | EEM |Environmental | Inventory | License |
Linecard-Hardware | Supervisor-Hardware | Syslog-group-port | System | Test}
user-def-cmd cli_command
no alert-group {All | Configuration | Diagnostic | Environmental | Inventory | License |
Linecard-Hardware | Supervisor-Hardware | Syslog-group-port | System | Test}
user-def-cmd cli_command
Specifies all alert groups—configuration, diagnostic, EEM, environmental,
inventory, license, linecard-hardware, supervisor-hardware, syslog-group-port,
system, and test.
Specifies events related to configurations.
Specifies events related to diagnostics.
Specifies events related to EEM.
Specifies events related to the inventory status.
Specifies events related to license.
Specifies events related to line card hardware.
Specifies events related to the supervisor module.
Specifies events related to syslog messages filed by port manager.
Specifies events related to software.
Specifies events related to tests.
Configures a valid CLI command for the alert group.
A Commands
OL-25806-03