Show Checkpoint - Cisco Nexus 7000 Series Reference Manual

Show Commands

show checkpoint

To display the contents of the checkpoint file, use the show checkpoint command.
Syntax Description
name
Defaults None
Command Modes
Any command mode
Supported User Roles network-admin
network-operator
vdc-operator
vdc-admin
Command History Release
4.0(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display the contents of the checkpoint file:
switch# show checkpoint stable
--------------------------------------------------------
Name: stable
version 4.0(2)
power redundancy-mode combined force
license grace-period
feature vrrp
feature tacacs+
feature ospf
feature pim
feature pim6
feature msdp
feature eigrp
feature rip
feature isis
feature pbr
feature private-vlan
feature port-security
feature interface-vlan
OL-25806-03
show checkpoint [name]
(Optional) Name of the checkpoint file. The name can be any alphanumeric string
up to 63 characters.
Modification
This command was introduced.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
show checkpoint
445