Cisco Nexus 7000 Series Reference Manual page 706

show tech-support all binary
show tech-support all binary
To collect logs from across the entire device in binary format, including virtual device contexts (VDCs)
and linecards, use the show tech-support all binary command.
Syntax Description bootflash:
logflash:
slot0:
Defaults None
Command Modes Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
6.2(2)
Usage Guidelines Binary tech support is a log-collecting framework that collects logs internally from all Cisco NX-OS
processes that are running on the device. The show tech-support all binary command collects logs from
across the entire device, including VDCs, and line cards. The logs are saved under one tarball that can
be easily transferred for later analysis.
Binary tech support can either be parsed within the device or moved to an external log server where it
can be parsed offline. The tool that is used to parse the logs is called DeBlogger. If a line card fails during
the log collection, binary tech support continues to collect logs from all remaining line cards and VDCs.
Note The output filename is automatically generated and cannot be chosen.
This command does not require a license.
Examples This example shows how to collect logs from across the entire device:
switch(config)# show tech-support all binary bootflash:
Cisco Nexus 7000 Series NX-OS System Management Command Reference
678
show tech-support all binary {bootflash: | logflash: | slot0:}
Specifies bootflash as the destination file system used to save the binary
output.
Specifies logflash as the destination file system used to save the binary
output.
Specifies slot0 as the destination file system used to save the binary output.
Modification
This command was introduced.
Show Commands
OL-25806-03