Cisco Nexus 7000 Series Reference Manual page 112

collect routing
This example shows how to configure the forwarding status as a nonkey field and collects the forwarding
status value:
switch(config)# flow record FLOW-RECORD-1
switch(config-flow-record)# collect routing forwarding-status
Related Commands Command
collect counter
collect flow
collect interface
collect ipv4
collect routing
collect timestamp
collect transport
flow record
match flow
match interface
match ipv4
match routing
match timestamp
match transport
show flow record
Cisco Nexus 7000 Series NX-OS System Management Command Reference
84
Description
Configures the counters as a nonkey field and collects the counter values.
Configures flow identifying fields as nonkey fields and collects their values.
Configures the input or output interface as a nonkey field and collects the
values.
Configures an IPv4 field as a nonkey field and collects the value in it.
Configures a routing attribute as a nonkey field and collects the value of the
field.
Configures the times tamp fields as a nonkey field and collects the values.
Configures a transport layer field as a nonkey field and collects the values.
Creates a flow record.
Configures one or more of the flow fields as key fields.
Configures the direction that traffic flows in respect to an interface (interface
field) as a key field.
Configures one or more of the IPv4 fields as key fields.
Configures one or more of the routing fields as key fields.
Configures a time stamp field as a key field.
Configures one or more of the transport fields as key fields.
Displays the flow record status and statistics.
C Commands
OL-25806-03