Cisco Nexus 7000 Series Reference Manual page 241

Nx-os system management command reference

Hide thumbs Also See for Nexus 7000 Series:

Table of Contents

This configuration command is applicable to the module inserted in a device. When the module is

removed and inserted into a new device, the configuration of this command follows the module to the

This command does not require a license.

This example shows how to configure OBFL message logging at level 7 (debugging):

Router> enable

switch# configure terminal

switch(config)# hw-module switch 2 module 1 logging onboard message level 7

switch(config)# end

Related Commands

clear logging onboard

show logging onboard

Connects to a specific line card for the purpose of

executing commands on that card.

Clears onboard failure logs.

Displays onboard failure logs.

Cisco Nexus 7000 Series NX-OS System Management Command Reference

hw-module logging onboard