Cisco Nexus 7000 Series Reference Manual page 171

Nx-os system management command reference

Hide thumbs Also See for Nexus 7000 Series:

Table of Contents

This command does not require a license.

This example shows how to specify a CLI command for the EEM applet to match:

switch# configure terminal

switch(config)# event manager applet eventcli-applet

switch(config-applet)# event cli match "write memory.*" time 13

switch(config-applet)#

The delimiter between the modes must be " ; ", which is a space followed by a semi-colon and

followed by another space.

Cisco Nexus 7000 Series NX-OS System Management Command Reference