event module status
event module status
To configure a status event on a module, use the event module status command. To remove the status
event configuration, use the no form of this command.
Syntax Description
online
offline
any
module
all
module-number Module number. The range is from 1 to 18.
Defaults
None
Command Modes
Embedded event manager
Supported User Roles
network-admin
vdc-admin
Command History
Release
4.0
Usage Guidelines
This command does not require a license.
Examples
This example shows how to configure a status event on a module:
switch(config)# event manager applet EVM1
switch(config-applet)# event module status any module 10
switch(config-applet)#
This example shows how to remove the status event configuration:
switch(config-applet)# no event module status any module 10
switch(config-applet)#
Cisco Nexus 7000 Series NX-OS System Management Command Reference
158
event module status {online | offline | any} module {all | module-number}
no event module status {online | offline | any} module {all | module-number}
Specifies the online status.
Specifies the offline status.
Specifies the online or offline status.
Specifies a module.
Specifies all modules.
Modification
This command was introduced.
E Commands
OL-25806-03