Cisco Nexus 7000 Series Reference Manual page 662

show snmp
Examples This example shows how to display the SNMP information:
switch(config)# show snmp
sys contact:
sys location: anyplace, Anywhere
0 SNMP packets input
0 SNMP packets output
Community
---------
Comm2
testCommunity
com3
______________________________________________________________
______________________________________________________________
User
____
foo
User3
admin
user1
______________________________________________________________
NOTIFICATION TARGET USERS (configured
______________________________________________________________
User
____
foo
(EngineID 11:22:33:44:55)
foo
(EngineID 33:0:33:22:33)
SNMP Tcp Authentication Flag : Enabled.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
634
0 Bad SNMP versions
0 Unknown community name
0 Illegal operation for community name supplied
0 Encoding errors
0 Number of requested variables
0 Number of altered variables
0 Get-request PDUs
0 Get-next PDUs
0 Set-request PDUs
0 Too big errors
0 No such name errors
0 Bad values errors
0 General errors
SNMP USERS
Group / Access
---------------
network-admin
vdc-operator
vdc-admin
Auth Priv(enforce) Groups
____ _____________ ______
md5 aes-128(no) network-operator
vdc-admin
network-admin
md5 no network-operator
md5 des(no) network-admin
md5 des(no) vdc-admin
for sending V3 Inform)
Auth Priv
____ ____
md5 no
sha no
Show Commands
OL-25806-03