Event Fanabsent - Cisco Nexus 7000 Series Reference Manual

event fanabsent

event fanabsent
To specify an event criteria for an Embedded Event Manager (EEM) applet that is run on the basis of a
fan absent event, use the event fanabsent command. To remove the fan absent event criteria, use the no
form of this command.
Syntax Description
fan number
time interval
Defaults
None
Command Modes Embedded event manager
Supported User Roles network-admin
vdc-admin
Command History Release
4.0(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to specify that an EEM applet runs when a fan absent event occurs:
switch# configure terminal
switch(config)# event manager applet absent-applet
switch(config-applet)# event fanabsent time 42
switch(config-applet)#
Cisco Nexus 7000 Series NX-OS System Management Command Reference
146
event fanabsent [fan number] time interval
no event fanabsent [fan number] time interval
(Optional) Specifies a fan number to monitor for a fan absent event. The range is
from 1 to 4.
Specifies the time interval (in seconds) within which the fan can stay absent. The
range is from 0 to 4294967295.
Modification
This command was introduced.
E Commands
OL-25806-03