Snmp-Server Context - Cisco Nexus 7000 Series Reference Manual

snmp-server context

snmp-server context
To configure the Simple Network Management Protocol (SNMP) context to logical network entity
mapping, use the snmp-server context command. To remove the context, use the no form of this
command.
Syntax Description
context-name
instance
instance-name
vrf vrf-name
topology
topology-name
Defaults
None
Command Modes Global configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
4.0(2)
Usage Guidelines Use the snmp-server context command to map between SNMP contexts and logical network entities,
such as protocol instances or VRFs.
Do not use the instance, vrf, or topology keywords to delete a context. If you use these keywords, you
map the context to a zero-length string.
If you are using SNMPv2c, use the snmp-server mib community-map command to map an SNMPv2c
community to an SNMP context and use the snmp-server context command to map this context to a
logical network entity.
For more information on context mapping, see the Cisco Nexus 7000 Series NX-OS Security
Configuration Guide, Release 6.x.
This command does not require a license.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
376
snmp-server context context-name [instance instance-name] [vrf vrf-name] [topology
topology-name]
no snmp-server context context-name [instance instance-name] [vrf vrf-name] [topology
topology-name]
SNMP context. The name can be any alphanumeric string up to 32 characters.
(Optional) Specifies a protocol instance. The name can be any alphanumeric
string up to 32 characters.
(Optional) Specifies the virtual routing and forwarding (VRF) instance. The name
can be any alphanumeric string up to 32 characters.
(Optional) Specifies the topology. The name can be any alphanumeric string up
to 32 characters.
Modification
This command was introduced.
S Commands
OL-25806-03