Show Cfs Lock - Cisco Nexus 7000 Series Reference Manual

Show Commands

show cfs lock

To display information about locks that are currently in place for an application that uses Cisco Fabric
Services (CFS) for distribution, use the show cfs lock command.
Syntax Description name
application_name
Defaults
None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.1(2)
Usage Guidelines This command does not require a license.
Examples This example shows how to display a lock that is currently in place for the Call Home application that
uses CFS for distribution:
switch(config-callhome)# show cfs lock name callhome
Scope
--------------------------------------------------------------------------------
Switch WWN
--------------------------------------------------------------------------------
20:00:00:22:55:79:a4:c1 172.28.230.85
Total number of entries = 10
OL-25806-03
show cfs lock [name application_name]
(Optional) Displays the name of a specific application.
Modification
This command was introduced.
: Physical-fc-ip
IP Address
switch
Cisco Nexus 7000 Series NX-OS System Management Command Reference
User Name User Type
admin CLI/SNMP v3
show cfs lock
435