Event Policy-Default - Cisco Nexus 7000 Series Reference Manual

event policy-default

event policy-default
To use the event if a system policy is being overridden, use the event policy-default command. To use
the overridden policy, use the no form of this command.
Syntax Description count count
time interval
Defaults None
Command Modes
Embedded event manager
Supported User Roles network-admin
vdc-admin
Command History Release
4.0(1)
Usage Guidelines
This command does not require a license.
Examples This example shows how to use the event in the system policy being overridden:
switch# configure terminal
switch(config)# event policy-default count 6
switch(config)#
Cisco Nexus 7000 Series NX-OS System Management Command Reference
162
event policy-default count count [time interval]
no event policy-default count count
Specifies the number of matching occurrences before a default event is triggered.
The range is from 0 to 4294967295.
(Optional) Specifies the time interval (in seconds) within which the events need
to happen. The range is from 0 to 4294967295.
Modification
This command was introduced.
E Commands
OL-25806-03