Show Commands
show flow timeout
To display the Flexible NetFlow flow cache timeout values, use the show flow timeout command.
Syntax Description
This command has no arguments or keywords.
Defaults
Information for the Flexible NetFlow accounting configuration on the interface is displayed.
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History
Release
6.1(1)
4.0(1)
Usage Guidelines
You must have already enabled traffic monitoring with Flexible NetFlow before you can use the
show flow timeout command.
This command does not require a license.
Examples
This example shows how to display the Flexible NetFlow flow cache timeout values for F2 VDC:
switch# show flow timeout
Flow timeout values
switch#
Related Commands
Command
flow timeout
OL-25806-03
show flow timeout
Modification
Changed the command output.
This command was introduced.
Active timeout:
Inactive timeout:
Flush Cache timeout
Fast timeout:
Session aging timeout:
Aggressive aging timeout: Disabled
Description
Creates a flow timeout.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
1800 seconds
15 seconds
15 seconds
Disabled
Disabled
show flow timeout
489