Show Event Manager History Events - Cisco Nexus 7000 Series Reference Manual

Show Commands

show event manager history events

To display the Embedded Event Manager (EEM) events that have been triggered, use the show event
manager history events command.
Syntax Description detail
maximum number (Optional) Specifies the maximum number of history events to display.
severity severity
Defaults None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0(1)
Usage Guidelines This command does not require a license.
Examples
This example shows how to display the EEM history events that have been triggered that were of severity
7:
switch# show event manager history events severity 7
switch#
OL-25806-03
show event manager history events [detail] [maximum number] [severity severity]
(Optional) Displays details of all event types.
(Optional) Displays only those events that were of the specified severity.
Modification
This command was introduced.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
show event manager history events
471