Cfs Eth - Cisco Nexus 7000 Series Reference Manual

cfs eth

cfs eth
To globally configure the device to use Ethernet to distribute changes for all Cisco Fabric Services
(CFS)-enabled applications, use the cfs eth command. To remove the CFS configuration, use the no form
of this command.
Syntax Description
distribute
Defaults None
Command Modes Global configuration mode (config)
Supported User Roles
network-admin
vdc-admin
Command History Release
4.1(2)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to configure the device to use Ethernet to distribute changes for all
CFS-enabled applications:
switch(config)# cfs eth distribute
switch(config)#
This example shows how to remove the CFS configuration:
switch(config)# no cfs eth distribute
This will prevent CFS from distributing over Ethernet network.
Are you sure? (y/n) n
switch(config)#
Related Commands Command
cfs distribute
show cfs status
Cisco Nexus 7000 Series NX-OS System Management Command Reference
42
cfs eth {distribute}
no cfs eth distribute
Enables CFS distribution over Ethernet.
Modification
This command was introduced.
Description
Globally enables CFS distribution for the device.
Displays the CFS distribution status.
C Commands
OL-25806-03