Ntp Master - Cisco Nexus 7000 Series Reference Manual

N Commands

ntp master

To configure the device to act as an authoritative Network Time Protocol (NTP) server, use the ntp
master command. To remove the device as an authoritative NTP server, use the no form of this
command.
Syntax Description
stratum
Defaults None
Command Modes Global configuration mode
Supported User Roles
network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines
This command enables the device to distribute time even when it is not synchronized to an existing time
server.
Make sure that you are in the correct virtual device context (VDC). To change the VDC, use the switchto
vdc command.
This command does not require a license.
Examples This example shows how to configure the device to act as an authoritative NTP server:
switch# configure terminal
switch(config)# feature ntp
switch(config)# ntp master 5
This example shows how to remove a device as an authoritative NTP server:
switch# configure terminal
switch(config)# no ntp master 5
OL-25806-03
ntp master [stratum]
no ntp master [stratum]
(Optional) Stratum level. The range is from 1 to 15.
Modification
This command was introduced.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
ntp master
301