Cisco Nexus 7000 Series Reference Manual page 509

Show Commands
show flow sw-monitor
To display the status and statistics for a Flexible NetFlow flow monitor, use the show flow monitor
command.
Syntax Description name exporter-name
cache
detailed
Defaults Information for all flow exporters configured on the router is displayed.
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0(1)
Usage Guidelines You must have already enabled traffic monitoring with Flexible NetFlow using an exporter before you
can use the show flow exporter command.
This command does not require a license.
Examples This example shows how to display the status and statistics for a flow monitor:
switch# show flow sw-monitor NFC-DC-PHOENIX statistics
Cache type:
Cache size:
Current entries:
High Watermark:
Flows added:
Flows aged:
OL-25806-03
show flow sw-monitor [name exporter-name] [cache [detailed]]
(Optional) Specifies the name of a flow exporter. The name can be any
case-sensitive, alphanumeric string up to 64 characters.
Displays the flow of packets generated by the supervisor. Use this command
with the show hardware flow {ip | ipv6} command to get all the flows on
the system.
(Optional) Displays detailed information about the flow of packets.
Modification
This command was introduced.
- Active timeout (
- Inactive timeout (
- Event aged
Cisco Nexus 7000 Series NX-OS System Management Command Reference
Normal
4096
4
6
116
112
1800 secs) 0
15 secs) 112
0
show flow sw-monitor
481