System Hap-Reset - Cisco Nexus 7000 Series Reference Manual

system hap-reset

system hap-reset
To enable the Supervisor Reset high availability (HA) policy, use the system hap-reset command.
Syntax Description
This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to enable the Supervisor Reset HA policy:
switch(config)# system hap-reset
switch(config)#
Related Commands Command
show system standby
manual-boot
Cisco Nexus 7000 Series NX-OS System Management Command Reference
408
system hap-reset
Modification
This command was introduced.
Description
Displays the status of the system standby manual boot option.
S Commands
OL-25806-03