Cisco Nexus 7000 Series Reference Manual page 218

filter frame-type eth
filter frame-type eth
To configure the Ethernet frame type filter for the Ethernet Switched Port Analyzer (SPAN) or
Encapsulated Remote Switched Port Analyzer (ERSPAN) session, use the filter frame-type eth
command. To remove the Ethernet frame type filter, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Command Modes config-monitor mode (for a SPAN session)
config-erspan-src mode (for an ERSPAN session)
Supported User Roles network-admin
vdc-admin
Command History Release
6.2(2)
Usage Guidelines This command does not require a license.
Examples This example shows how to configure the Ethernet frame type filter for a SPAN session:
switch(config)# monitor session 1
switch(config-monitor)# filter frame-type eth
This example shows how to configure the Ethernet frame type filter for an ERSPAN session:
switch(config)# monitor session 1 type erspan-source
switch(config-erspan-src)# filter frame-type eth
Related Commands Command
filter (ERSPAN)
filter (SPAN)
filter frame-type arp
filter frame-type fcoe
filter frame-type ipv4
Cisco Nexus 7000 Series NX-OS System Management Command Reference
190
filter frame-type eth
no filter frame-type eth
Modification
This command was introduced.
Description
Configures the filters for an ERSPAN session.
Configures the filters for a SPAN session.
Configures the ARP frame type filter for the ERSPAN session.
Configures the FCoE frame type filter for the SPAN or ERSPAN session.
Configures the IPv4 frame type filter for the SPAN or ERSPAN session.
F Commands
OL-25806-03