Show System Redundancy - Cisco Nexus 7000 Reference

show system redundancy

S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m
show system redundancy
To display the system redundancy status, use the show system redundancy command.
Syntax Description
ha
Defaults
None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0(1)
Usage Guidelines This command does not require a license.
Examples
This example shows how to display the system redundancy status:
switch# show system redundancy status
Redundancy mode
---------------
This supervisor (sup-1)
-----------------------
Other supervisor (sup-2)
------------------------
switch#
Cisco Nexus 7000 Series NX-OS High Availability Command Reference, Release 5.x
HACR-14
show system redundancy [ha] status
(Optional) Displays the virtual device context (VDC) redundancy (high
availability) status.
Modification
This command was introduced.
administrative: HA
operational: None
Redundancy state: Active
Supervisor state: Active
Internal state: Active with no standby
Redundancy state: Not present
Cisco Nexus 7000 Series NX-OS High Availability Commands
OL-23374-01