Cisco Nexus 7000 Series Reference Manual page 612

show port-monitor active
show port-monitor active
To display information about the active Simple Network Management Protocol (SNMP) port-monitor
policies, use the show port-monitor active command.
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.1(2)
Usage Guidelines This command does not require a license.
Examples
This example shows how to display information about the active SNMP port-monitor policies:
switch(config)# show port-monitor active
Policy Name
Admin status : Active
Oper status
Port type
--------------------------------------------------------------------------------
-----------
Counter
vent In Use
-------
---- ------
Link Loss
Sync Loss
Protocol Error
Signal Loss
Invalid Words
Cisco Nexus 7000 Series NX-OS System Management Command Reference
584
show port-monitor active
Modification
This command was introduced.
: test
: Active
: All Ports
Threshold
---------
Delta
Yes
Delta
Yes
Delta
Yes
Delta
Yes
Delta
Interval Rising Threshold event Falling Threshold
-------- ---------------- ----- ------------------ -
60 5
60 5
60 1
60 5
60 1
4 1
4 1
4 0
4 1
4 0
Show Commands
e
4
4
4
4
4
OL-25806-03