Hw-Module Logging Onboard - Cisco Nexus 7000 Series Reference Manual

hw-module logging onboard

hw-module logging onboard
To enable onboard failure logging (OBFL) based on the error type, use the hw-module logging onboard
command. To disable OBFL (not recommended), use the no form of this command.
Syntax Description counter-stats
environmental-history (Optional) Specifies the OBFL environmental history.
error-stats
interrupt-stats
module num
obfl-log
Defaults Enabled and is the recommended state.
Command Modes Global configuration mode
Supported User Roles
network-admin
vdc-admin
Command History Release
4.0(1)
4.0(2)
Usage Guidelines The hw-module logging onboard command enables events to be recorded in files stored in nonvolatile
memory, so that the data can be used to diagnose problems with hardware modules installed in a Cisco
router or switch. When the onboard hardware is started up, a first record is made for each area monitored
and becomes a base value for subsequent records. This command provides a circular updating scheme
for collecting continuous records and archiving older (historical) records, ensuring accurate data about
the hardware. Data is recorded in one of two formats: continuous information that displays a snapshot
of data in a continuous file, and summary information that provides details about the data being
collected. Use the show logging onboard command to see reports of current and historical data.
We recommend that you do not disable OBFL.
Note
Cisco Nexus 7000 Series NX-OS System Management Command Reference
212
hw-module logging onboard [counter-stats] [environmental-history] [error-stats]
[interrupt-stats] [module num] [obfl-log]
no hw-module logging onboard [environmental-history] [error-stats] [interrupt-stats] [module
num] [obfl-log]
(Optional) Specifies the OBFL counter statistics.
(Optional) Specifies OBFL error statistics.
(Optional) Specifies OBFL interrupt statistics.
(Optional) Specifies OBFL information for a specific module.
(Optional) Specifies OBFL (boot-uptime/device-version/obfl-history).
Modification
This command was introduced.
Added counter-stats keyword.
H Commands
OL-25806-03