Diagnostic Bootup Level - Cisco Nexus 7000 Series Reference Manual

diagnostic bootup level

diagnostic bootup level
To configure the diagnostic bootup level to trigger diagnostics when the device boots, use the diagnostic
bootup level command.
Syntax Description bypass
complete
Defaults None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0(1)
Usage Guidelines This command does not require a license.
Examples
This example shows how to configure the diagnostic bootup level:
switch(config)# diagnostic bootup level bypass
switch#
Related Commands Command
show diagnostic bootup
level
Cisco Nexus 7000 Series NX-OS System Management Command Reference
120
diagnostic bootup level {bypass | complete}
Specifies to not perform any bootup diagnostics.
Displays all bootup diagnostics. The default is complete.
Modification
This command was introduced.
Description
Displays the diagnostic bootup level.
D Commands
OL-25806-03