Other Paper Jam - Toshiba e-STUDIO 2555C Service Manual

8.3.5

Other paper jam

[E011] Paper jam caused by clinging to the transfer belt (Paper not reached the paper clinging
detection sensor)
Classification
Other paper jam
Phenomenon of paper jamming
Paper jamming immediately
after the removal and
installation of the transfer belt
unit.
Paper stop jam at transfer belt
No scratches on the paper
leading edge
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
Paper jam caused by clinging to the transfer belt (Paper not
reached the paper clinging detection sensor)
Check item
Transfer belt Check if the transfer belt unit is installed properly.
 P. 4-130 "4.7.3 Transfer belt unit (TBU)"
unit
Drawer Check if paper is folded at the leading edge.
Drawer Check if paper is folded at the leading edge.
Check that paper is not skewed in the side guides
of the drawer.
Process unit Clean the process unit or replace it.
Paper Clean the sensor
clinging
detection
sensor
8 - 61
Error content
Measures
e-STUDIO2555C/3055C/3555C/4555C/5055C
ERROR CODE AND TROUBLESHOOTING
8