Toshiba e-STUDIO 2555C Service Manual page 838

Cause/Section Step
Printer output 5
image
abnormal
* If the trouble is not solved at the step 1 and the step 2 or followings (excluding the parameter
adjustment) are performed, make sure to perform "Enforced performing of image quality closed-loop
control" and then "Automatic gamma adjustment" after taking a measure.
e-STUDIO2555C/3055C/3555C/4555C/5055C
ERROR CODE AND TROUBLESHOOTING
Check item
Is there any faded image (low
density)?
Is there any fog in the
background?
Is there any blotch image?
Is there any poor transfer?
Is there any poor cleaning of
the transfer belt? (Check inside
the equipment.)
8 - 282
Measures
Perform the troubleshooting
procedures against the faded
image.
Perform the troubleshooting
procedures against the
background fogging.
Perform the troubleshooting
procedures against the blotch
image.
Perform the troubleshooting
procedures against the poor
transfer.
Correct the transfer belt area.
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
Remarks