Platen Sensor-1, -2 (S21, S22) - Toshiba e-STUDIO 2555C Service Manual

4.3.8

Platen sensor-1, -2 (S21, S22)

(1) Remove the top rear cover.
 P. 4-5 "4.1.14 Top rear cover"
(2) Remove the rear top cover.
 P. 4-5 "4.1.13 Rear top cover"
(3) Remove 4 screws.
(4) Remove 1 screw and take off the platen
sensor assembly [1].
(5) Disconnect the 2 connectors [1], and remove
the platen sensor-1 [2] and the platen
sensor-2 [3].
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-44
Fig. 4-45
Fig. 4-46
e-STUDIO2555C/3055C/3555C/4555C/5055C
4 - 17
DISASSEMBLY AND REPLACEMENT
4