Toshiba e-STUDIO 2555C Service Manual page 714

Check item
Exit roller
Exit motor (M11).
Finisher control board
Replace parts
Exit motor
Finisher control board
[CB14] Paper pusher arm motor (M10) abnormality
MJ-1108
Classification
Finisher related service call
Check item
Paper pusher cam
Assist arm motor (M10)
Finisher control board
Replace parts
Assist arm motor
Finisher control board
[CB30] Movable tray shift motor (M1) abnormality, Movable tray paper top detection error
MJ-1036
Classification
Finisher related service call
e-STUDIO2555C/3055C/3555C/4555C/5055C
ERROR CODE AND TROUBLESHOOTING
• Is there any mechanical problem when the exit roller is
rotated?
• Motor check
• Connector check
• Harness check
• Connector check (CN13)
• Board check
• Is there any mechanical problem when the paper pusher
cam is rotated?
• Motor check
• Connector check
• Harness check
• Connector check (CN13)
• Board check
Movable tray shift motor abnormality: The movable tray shift
motor is not rotating or the movable tray is not moving normally.
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
8 - 158
Measures
Remarks
Error item
Measures
Remarks
Contents