Mono/Color Switching Motor (M3) - Toshiba e-STUDIO 2555C Service Manual

4.6.27

Mono/color switching motor (M3)

(1) Remove the rear cover.
 P. 4-6 "4.1.15 Rear cover"
(2) Disconnect the 1 connector [1], and release
the harness from the harness guide.
(3) Remove 2 screws and take off the mono/
color switching motor bracket [2].
(4) Remove the arm [1].
Notes:
When installing the mono/color switching
motor bracket, put the gear projection [3] into
the arm hole [2].
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-300
Fig. 4-301
Fig. 4-302
e-STUDIO2555C/3055C/3555C/4555C/5055C
4 - 105
DISASSEMBLY AND REPLACEMENT
4