High-Voltage Transformer (Hvt) - Toshiba e-STUDIO 2555C Service Manual

(5) Remove 15 screws and disconnect the 1
connector [1], and take off the switching
regulator board [2].
9.1.8

High-voltage transformer (HVT)

Notes:
Be sure to unplug the power cable before starting this work.
(1) Remove the developer unit cooling fan unit.
 P. 4-122 "4.6.40 Developer unit cooling
fan (F5)"
(2) Disconnect the 2 connectors [1].
(3) Remove 5 screws [1].
(4) Release 4 locking supports [2] and take off
the high-voltage transformer [3].
Notes:
When installing, match the frame with the
concave portion of the high-voltage
transformer, and then push it until the
supports [2] are locked.
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
Fig. 9-22
Fig. 9-23
Fig. 9-24
e-STUDIO2555C/3055C/3555C/4555C/5055C
REPLACEMENT OF PC BOARDS/HDD
9 - 9
9