Reverse Roller - Toshiba e-STUDIO 2555C Service Manual

4.10.7

Reverse roller

(1) Remove the reverse motor unit.
 P. 4-185 "4.10.4 Reverse motor (M5)"
(2) Remove the 1 gear [1], 1 clip [2], and 2
bushings [3], then take off the revers roller
[4].
4.10.8 Exit section cooling fan (F7)
(1) Remove the inner cover.
 P. 4-6 "4.1.16 Front cover switch (SW1)"
(2) Remove the front right cover.
 P. 4-5 "4.1.12 Front right cover"
(3) Remove 2 screws and disconnect the 1
connector [1], and take off the duct [2].
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-527
Fig. 4-528
Fig. 4-529
e-STUDIO2555C/3055C/3555C/4555C/5055C
4 - 189
DISASSEMBLY AND REPLACEMENT
4