Toshiba e-STUDIO 2555C Service Manual page 318

(5) Disconnect the 1 connector [1], remove 2
screws.
(6) Remove 1 screw.
Notes:
The screw on the front side is a shoulder
screw. When installing, exercise care not to
confuse it with other kinds of screws.
(7) Lift the rear side [2] of the reverse unit [1] to
release the rear side hook. Slide the reverse
unit [1] to the rear side [3], release the front
side insertion and pull out the reverse unit [4]
by tilting it.
e-STUDIO2555C/3055C/3555C/4555C/5055C
DISASSEMBLY AND REPLACEMENT
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
4 - 182
Fig. 4-507
Fig. 4-508
Fig. 4-509