Scanner - Toshiba e-STUDIO 2555C Service Manual

6.6

Scanner

6.6.1 Adjustment carriages-1 positions
(1) Take off the RADF.
 P. 4-206 "4.12.1 MR-3025 (Reversing
Automatic Document Feeder)"
(2) Take off the right top cover.
 P. 4-3 "4.1.8 Right top cover"
(3) Take off the original glass.
 P. 4-12 "4.3.1 Original glass"
(4) Take off the left top cover.
 P. 4-2 "4.1.5 Left top cover"
(5) Move the carriage-1[1] toward the exit side.
Notes:
Rotate the drive pulley to move the carriage.
(6) Loosen the 2 fixing screws of the wire.
Tighten the screws by aligning the sections
[5] and [6] of the carriage-1 with the inside of
the exit side frame [2].
Notes:
Confirm that they are aligned properly
through the windows [3] and [4] of the exit
side frame [2].
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
Fig.6-24
Fig.6-25
e-STUDIO2555C/3055C/3555C/4555C/5055C
6 - 79
SETTING / ADJUSTMENT
6