Pressure Roller - Toshiba e-STUDIO 2555C Service Manual

4.9.11

Pressure roller

Notes:
The pressure spring differs between the
25ppm/30ppm/35ppm and 45ppm/50pm
models.
25ppm/30ppm/35ppm: Silver
45ppm/50pm: Black
(1) Remove the fuser belt unit.
 P. 4-153 "4.9.8 Fuser belt"
(2) Remove the 1 E-ring [1] and 3 gears [2].
Notes:
When replacing the parts or performing
preventive maintenance, apply an
appropriate amount of white grease
(Molykote EM-30L) to the shaft [1] and the
point [2] where the shaft [1] and the bracket
contact.
(3) Remove 2 screws from the rear side.
e-STUDIO2555C/3055C/3555C/4555C/5055C
DISASSEMBLY AND REPLACEMENT
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
4 - 164
Fig. 4-459
[1] [2]
Fig. 4-460
Fig. 4-461