Toshiba e-STUDIO 2555C Service Manual page 290

(3) Remove 1 screw and take off the harness
holder [1].
(4) Remove 4 screws, and take off the
separation guide frame [1].
(5) Remove 3 screws from the front side, and
take off the plate [1].
(6) Remove the gear [2].
Notes:
When removing, check that the pressure
roller contact/release cam [3] is located at
the release position, and also that the fuser
belt and pressure roller are released [4].
e-STUDIO2555C/3055C/3555C/4555C/5055C
DISASSEMBLY AND REPLACEMENT
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
4 - 154
Fig. 4-430
Fig. 4-431
Fig. 4-432