Bypass Feed Roller - Toshiba e-STUDIO 2555C Service Manual

4.5.2

Bypass feed roller

(1) Open the bypass tray.
(2) Tip the paper holder release lever outward to
release the pressure.
(3) Press the collar [1] toward the rear side and
release the lock.
(4) Remove the bypass feed roller [1] while
pulling out it.
Notes:
Make sure that the coupling is engaged
when the bypass feed roller is replaced.
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-107
Fig. 4-108
Fig. 4-109
e-STUDIO2555C/3055C/3555C/4555C/5055C
4 - 39
DISASSEMBLY AND REPLACEMENT
4