Control Panel - Toshiba e-STUDIO 2555C Service Manual

4.2

Control Panel

4.2.1 Control panel unit
(1) Remove the SYS board cover.
 P. 9-1 "9.1.1 SYS Board cover"
(2) Disconnect the 1 connector [1] from the SYS
board (CN119).
(3) Remove the front top cover.
 P. 4-4 "4.1.11 Front top cover"
(4) Lower the control panel unit [1] and remove 2
screws.
(5) Remove the control panel unit [1] while
sliding it toward the upper side.
Notes:
When installing, pass the harness through
the harness clamp of the frame.
e-STUDIO2555C/3055C/3555C/4555C/5055C
DISASSEMBLY AND REPLACEMENT
Fig. 4-20
Fig. 4-21
Fig. 4-22
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
4 - 8