Image Skewing On Paper Trailing Edge - Toshiba e-STUDIO 2555C Service Manual

Multifunctional digital color systems

Hide thumbs Also See for e-STUDIO 2555C:

Image Skewing on Paper Trailing Edge

When a grid pattern is output, follow the procedure below if the image on the paper trailing edge is

skewed by 1.0 mm or more.

[A] The rear side in the secondary scanning direction is longer than the front side. (Front <

Cause/Section

e-STUDIO2555C/3055C/3555C/4555C/5055C

ERROR CODE AND TROUBLESHOOTING

Fuser unit guide rail

Feeding direction

Adjust the fuser unit guide rail (Fig.8-

1. Take off the fuser unit.

2. Loosen the 1 screw [1] of the front

guide rail in the fuser unit.

3. Remove 1 screw [2] and attach it to

the screw hole for adjustment [3].

4. Move the guide rail upward by 1

Moving it by 1 mm changes the

screw in the trailing edge by

There is 0.5-mm scale [4].

5. Tighten the 1 screw [1] of the front

guide rail in the fuser unit.

6. Install the fuser unit.

Check that the image on the

paper trailing edge is skewed by

1 mm or less after the

Show Quick Links