9.1.4
Hard disk (HDD)
(1)
Take off the SYS board cover.
P. 9-1 "9.1.1 SYS Board cover"
(2)
Remove 4 screws.
(3)
Disconnect the 2 connectors [1], and take
off the HDD unit [2].
(4)
Remove 4 screws and take off the hard disk
[1] and ground wire [2].
(5)
Disconnect the 1 connector [3].
e-STUDIO2555C/3055C/3555C/4555C/5055C
REPLACEMENT OF PC BOARDS/HDD
Fig. 9-10
Fig. 9-11
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
9 - 4
Fig. 9-9