Input Check (Test Mode 03) - Toshiba e-STUDIO 2555C Service Manual

5.3

Input check (Test mode 03)

The status of each input signal can be checked by pressing the [FAX] button, [COPY] button,
[SCAN] button and the digital keys in the test mode (03).
<Operation procedure>
[0][3]
[START]
[POWER]
[CLEAR]
Notes:
• Initialization is performed before the equipment enters the test mode.
• The PRINT DATA lamp blinks when the input check is running.
Refer to "15. SELF-DIAGNOSIS CODE (03/04/05/08 CODE)" in this manual for the items to be
checked and the condition of the equipment when the buttons [A] to [H] are highlighted.
e-STUDIO2555C/3055C/3555C/4555C/5055C
SELF-DIAGNOSTIC MODE
[FAX]
[COPY]
[Digital keys]
or
[SCAN]
[CLEAR]
Fig.5-5 Example of display during input check
5 - 8
(LCD ON) [POWER] OFF/ON
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
(Exit)