Touch Panel - Toshiba e-STUDIO 2555C Service Manual

(3) Remove 4 screws and disconnect 1 flat
cable, and then take off the bracket [1].
(4) Remove 3 conductive sheets [1], disconnect
the 2 connectors [2], and take off 1 flat cable.
(5) Remove the DSP board [3].
4.2.4

Touch panel

(1) Remove the DSP board.
 P. 4-9 "4.2.3 DSP board"
(2) Remove the case [1].
e-STUDIO2555C/3055C/3555C/4555C/5055C
DISASSEMBLY AND REPLACEMENT
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
4 - 10
Fig. 4-26
Fig. 4-27
Fig. 4-28