Toshiba e-STUDIO 2555C Service Manual page 203

(5) Remove 1 spring [1].
(6) Disconnect the 4 connectors [2].
Notes:
To prevent you from connecting the wrong
connector, install the harness that matches
the engraved-mark color.
(7) Release the harness from the harness guide.
(8) Remove the transport clutch (L).
 P. 4-70 "4.5.33 Transport clutch (L)
(CLT6)"
(9) Remove the 3 clips [1], and take off the 3
bushings [2].
(10) Remove 2 screws, and take off the clutch
cover [3].
(11) Remove the 1st drawer feed clutch [1].
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-191
Fig. 4-192
Fig. 4-193
e-STUDIO2555C/3055C/3555C/4555C/5055C
4 - 67
DISASSEMBLY AND REPLACEMENT
4