Toshiba e-STUDIO 2555C Service Manual page 481

Press the [OK] or [INTERRUPT] button to store the value in memory. → The equipment goes
(5)
back to the ready state.
(6) For resetting the value, repeat step (2) to (5).
(7) Let the equipment restart and perform the printing job.
(8) If the image density has not been attained, repeat step (1) to (7)
<Range of the density area (low density, medium density, high density)>
The color from the 1st to the 7th stage (low density), from the 8th to the 11th stage (medium density)
and from the 12th to the 13th stage (high density) in "Patch chart for gamma adjustment ([71] [FAX])"
output as a confirmation in  P. 6-51 "6.3.1 Automatic gamma adjustment" can be used as a guide for
the range of the density area (low density, medium density, high density) influenced by the change of
the adjustment value.
1
2
3
Low
4
density
5
6
7
8
9
Medium
density
10
11
12
High density
13
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
Fig.6-22
e-STUDIO2555C/3055C/3555C/4555C/5055C
6 - 55
SETTING / ADJUSTMENT
6