Toshiba e-STUDIO 2555C Service Manual page 606

Check item
LGC board
Parts to be replaced
2nd drawer feed sensor
DRV board
LGC board
2nd drawer feed clutch
2nd drawer feed roller
2nd drawer separation roller
2nd drawer pickup roller
[E150] PFP upper drawer misfeeding (paper not reaching the PFP upper drawer feed sensor)
Classification
Paper transport jam
Check item
PFP upper drawer feed sensor •
PFP upper drawer feed clutch
LGC board
PFP board
Parts to be replaced
PFP upper drawer feed sensor
PFP upper drawer feed clutch
LGC board
PFP board
PFP upper drawer feed roller
Separation roller
Pickup roller
[E160] PFP lower drawer misfeeding (paper not reaching the PFP lower drawer feed sensor)
Classification
Paper transport jam
e-STUDIO2555C/3055C/3555C/4555C/5055C
ERROR CODE AND TROUBLESHOOTING
• Board check
• Connector check (CN361, CN362)
• Harness check
Replace it if it is worn out.
Replace it if it is worn out.
Replace it if it is worn out.
PFP upper drawer misfeeding (paper not reaching the PFP upper
drawer feed sensor)
Sensor check (Perform the input check: 03-[FAX]ON/[0]/[C])
• Connector check (CN247, J959, J975)
• Harness check
• Clutch check (Perform the output check: 03-226)
• Connector check (CN246, J960, J963)
• Harness check
• Board check
• Connector check (CN371)
• Harness check
• Board check
• Connector check (J959, CN241, CN246, CN247)
• Harness check
Replace it if it is worn out.
Replace it if it is worn out.
Replace it if it is worn out.
PFP lower drawer misfeeding (paper not reaching the PFP lower
drawer feed sensor)
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
8 - 50
Measures
Remark
Error content
Measures
Remark
Error content