(5)
Remove the 1st transfer contact/release
clutch [1].
Notes:
When installing, align the 1st transfer
contact/release clutch stopper [1] to the 1st
transfer contact/release clutch cover hole [2].
4.7.12
1st transfer roller status detection sensor (S12)
(1)
Remove the drum and TBU drive unit.
P. 4-141 "4.7.14 Drum and TBU drive
unit"
(2)
Remove 2 screws and take off the 1st
transfer contact/release gear unit [1].
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-385
Fig. 4-386
Fig. 4-387
e-STUDIO2555C/3055C/3555C/4555C/5055C
4 - 139
DISASSEMBLY AND REPLACEMENT
4