Toshiba e-STUDIO 2555C Service Manual page 173

Notes:
When removing the hinge stoppers [1], move
the projection portion to the wider part [2] of
the groove.
(5) Fix the hinge stopper [1] on the rear side as
shown in the right figure. Lift the bypass unit
[2] up and move the projection portion of the
bypass unit [2] to the wider part of the groove
of the hinge stopper [1], then release the
hinge stopper.
Notes:
When removing the hinge stopper [1], move
the projection portion to the wider part [2] of
the groove.
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-101
Fig. 4-102
Fig. 4-103
e-STUDIO2555C/3055C/3555C/4555C/5055C
4 - 37
DISASSEMBLY AND REPLACEMENT
4