Automatic Original Detection Sensor-1, -2 (S24, S25) - Toshiba e-STUDIO 2555C Service Manual

4.3.3

Automatic original detection sensor-1, -2 (S24, S25)

(1) Remove the lens cover.
 P. 4-12 "4.3.2 Lens cover"
(2) Remove 1 screw and take off the automatic
original detection sensor-1 and -2 [1].
Notes:
• Only the 20ppm/25ppm are equipped with
automatic original detection sensors-1
and -2.
• A4 models are equipped only with
automatic original detection sensor-1 and
LT models are equipped with automatic
original detection sensors-1 and -2.
4.3.4 Lens unit/CCD driving PC board
(1) Remove the automatic original detection
sensor.
 P. 4-13 "4.3.3 Automatic original detection
sensor-1, -2 (S24, S25)"
(2) Disconnect 1 connector [1].
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-33
Fig. 4-34
e-STUDIO2555C/3055C/3555C/4555C/5055C
4 - 13
DISASSEMBLY AND REPLACEMENT
4